LXC701 Auto Start Controller Module Replace DSE701 Diesel Generator Control Panel Genset Spare Parts

Electronic Engine ControlLXC701 auto start module controller diesel generator control board panel genset part replace dse701product description:LXC701 genset controller is a self-starting module, and 3 working modes can be selected by touching the buttons on the panel. You can start or stop the generator set manually by touching a button on the panel, or you can start the generator set automatically through the remote start signal input, and can detect faults (low oil pressure, high water temperature / cylinder temperature, emergency shutdown alarm, overspeed). ) When the fuel relay is automatically disconnected and the solenoid is stopped at the same time, the electric solenoid is closed. The LED on the panel indicates the fault status and provides real and effective fault alarm signals.Product performance and features:1. Wide power supply range (8-35) VDC, can adapt to different starting battery voltage environment2. With low oil pressure, high water temperature / cylinder temperature, overspeed, emergency stop, start failure and other protection and instructions3. Can provide excitation function of charging generator4. With idle speed control and power-off function5. Speed signal is taken from power generation frequency6. Panel LED displays various running and alarm status7. 4 relay fixed output ports (fuel output, start output, stop output, idle speed output)8. 1 programmable output port, which can set common alarm output, shutdown failure output, preheat output or non-power generation alarm output, etc.9. Connected to the PC for programming through the USB interface. Various delays, output definitions, and power thresholds required for the generator set to work can be set through the PC.10. Built-in watchdog that never crashes to ensure smooth program execution11. Modular structure design, flame retardant ABS plastic shell, embedded installation method, compact structure, small size, advanced single chip control, stable performance, easy operationSpecifications: power supply: 8 - 35V.Power input: single-phase AC10 - 400V 50 or 60Hz.5 output ports: 5A current, power supply B + relay output.3 digital input ports: Connect to B-effective.Power consumption: Standby (12V: 0.3W, 24V: 0.4W), normal operation (12V: 1W, 24V: 1.1W).Working environment: Temperature: -30 - + 70 Humidity: 20 - 95%Dimensions: 72 * 72 * 38mmOpening size: 67 * 67mm.Weight: 0.2Kg.Since the launch of LXC701 generator controller is a controller, high reliability, simple installation, convenient operation, high cost performance, is a more popular controller, we mainly introduce below, LXC701 controllerWiring, mainly is 14 terminals, specific as follows:Terminal 1 (B) : external starting battery cathode.Terminal 2 (B +) : external starting battery positive electrode.Terminal 3 (Em. Stop input) : emergency stop input (input B + voltage effective), an external emergency stop normal close button.Mixer terminal 4 (arg, the Output) : Fuel outlet (B +), an external Fuel relay, contact capacity 5 a.Terminal 5 (Start Output) : starting outlet (B +), external starter relay, contact capacity 5 a.Terminal 6 (Remote Start Input) : Remote boot Input port, B - effectively.Terminal 7 (D +) : after charging generator WL (or D +) terminal, internal provide charger controller excitation current.When charging charging generator failure (i.e., in the process of running D + terminal voltage is less than the default value), long charging failure indicator light on the front panel (charging failed non-stop, indicating only).Terminal 8 configured (LOP) : low oil pressure switch signal Input port, B - effectively.Terminal 9 (HWT) Input) : high temperature/cylinder temperature switch Input port, and the B - effectively.Mixer terminal 10 (Configurable Output3) : (B +), programmable output contact capacity 5 a.Switch output can be set up by a computer.11 pieces terminals (Configurable Output2) : (B +), programmable output contact capacity 5 a.12 pieces terminals (Configurable Output1) : (B +), programmable output contact capacity 5 a.Mixer terminal 13 (N), 14 (L) : external generator voltage signal, judge success and provides overspeed starting/low speed protection.USB interface: used in the controller parameter programming through the USB cable to connect the computer directly.==========Model Number : LXC701

• Electronic Engine Control
• LXC701 Auto Start Controller Module Replace DSE701 Diesel Generator Control Panel Genset Spare Parts